Maintaining grayed wood deck
This is a record about maintaining wood deck and what tool I needed. It took one and a half year because I tested the whole process.
Drive SC1602 and SC2004 with Raspberry Pi
As I program a driver of SC1602 with paying attention to readability, I even found a defective of SC1602.
How to paint stain and water-based urethane varnish
Today I will show you how to apply polishing powder, and how to paint stain. I tried to explain the steps and points with samples as many as possible.
Drive RHT03 with Raspberry Pi
RHT03 is a hygrometer of MaxDetect. Today, I report how to control an RHT03 with a Raspberry Pi. It was great effort because I am a beginner.
Beginner’s oil-finishing with Watco
I found Watco by chance in the store. I thought the word “oil finish” sounds like craftsman-like, and something craftsman-like would make goods better, which was a lighthearted attitude.
A total beginner started to learn paintings for woodworking
As I processed Raspberry Pi cases and dimmer, I thought using wood would be a good idea because wood can be bought easily at fewer prices. Also making furniture is one of my goals. This is why I started to learn paintings.
Making and studying an Akizuki Triac Dimmer (speed controller) and case processing
I made a “multi-purpose dimmer with a triac” sold at Akizuki Denshi. There were many troubles because I am a beginner. I needed not only to solder but also making new holes on the circuit board and process a Takachi case.
Drilling a Raspberry Pi case
I drilled my Raspberry Pi case to take GPIO pins out of case. I needed knowledge of DIY (Do it yourself) of both wood and metal.
Where to buy Raspberry Pi in Akihabara?
Updated: April 10, 2016 These are stores selling Raspberry Pi. Raspberry Pi 3 arrived in Akihabara. Some people comment the latest information on the Japanese page. You should check this also!
Making Raspberry Pi program by cross-compiling C++ with Eclipse on CentOS
On the post written in the end of June, “A total beginner started to learn electronics with Raspberry Pi”, I wrote a shell script to turn on an LED ramp. Shell scripting is easy to start, but I thought using C language might increase possibility. I finally made a developing environment for stress-free programming.